My new engine

Post Links to Your Rides Pictures Here

My new engine

Postby ky mustang » Sat May 09, 2009 2:41 pm

Here is a video and dyno 's of my new 562 cid big block ford engine. We used the Kaase aluminum P51 cyleder heads on this engine. These are an oem layout head , but the valve angles are moved just slightly from the factory specs , for those not familiar with them. They are basically considered to be a street / strip head and not an all out race head. I am just tickled with the power it made =;



RPM TQ HP
5500 763.9 800
5600 767.1 817.9
5700 767.5 833
5800 771.3 851.8
5900 776.2 872
6000 786.9 899
6100 785.5 912.3
6200 780.9 921.9
6300 776.5 931.4
6400 768.5 936.5
6500 760.2 940.8
6600 752.9 946.1
6700 745.2 950.6
6800 734.2 950.6
6900 724.1 951.3
7000 713.3 950.7
Image
User avatar
ky mustang
 
Posts: 123
Joined: Thu Apr 16, 2009 7:14 pm
Location: Benton, KY
Top

Re: My new engine

Postby Ken0069 » Sat May 09, 2009 4:01 pm

Sigh.......I'm gonna have me a "BIG" motor some day! :-({|=
User avatar
Ken0069
Site Admin
 
Posts: 7819
Joined: Tue Apr 18, 2006 7:38 am
Location: Concord, Va
  • Website
Top

Re: My new engine

Postby ky mustang » Mon May 18, 2009 9:02 am

I went to Beach bend yesterday for a few test passes , bent the wheelie bar bracket =;. It had a 1.19 60' with the back tires . Time to detune the chassis [-(

Image
User avatar
ky mustang
 
Posts: 123
Joined: Thu Apr 16, 2009 7:14 pm
Location: Benton, KY
Top

Re: My new engine

Postby Beretta » Mon May 18, 2009 9:57 am

Looks like time to lengthen the IC......
Image
My Beretta is DONE!!  If that's  possible..
540 is done!!
Best ET 8.13 @ 169 mph
Barry
User avatar
Beretta
 
Posts: 4466
Joined: Wed Apr 19, 2006 9:20 pm
Location: N.J.
Top

Re: My new engine

Postby gearhead1011 » Mon May 18, 2009 10:16 am

Wow! you can see how bad it bent the wheelie bar on that run. I think with that kind of power you might need longer wheelie bars. If you decide that motor's gonna be too hard on your car you can just donate it to me 8-[.
Chuck Woloch

Chuck's Automotive
Full line Computech dealer

Image
User avatar
gearhead1011
 
Posts: 2238
Joined: Wed Apr 19, 2006 5:11 pm
Location: Shepherdsville, KY
Top

Re: My new engine

Postby WR169 » Mon May 18, 2009 9:08 pm

I saw the car and I didn't know it was you. That thing flies \:D/\:D/\:D/\:D/
Steve

6.7772 @ 101.51 1/8th 10.747 @ 122.24 1/4
User avatar
WR169
 
Posts: 3808
Joined: Wed Dec 06, 2006 10:24 pm
Location: Elizabethtown, KY
Top

Re: My new engine

Postby ky mustang » Mon May 18, 2009 10:47 pm

If I had knew you were there I would have came by and bs 'ed a little. I got a little shaken over the wheel stand and took a break to collect my thoughts =;That place was packed. I will let you know the next time I am headed up that way.

I was not surprised it bent the bracket they were mickey mouse anyway. I did not expect it to get on the bars like that though . I tightened up the shocks and calmed it down a bit.
User avatar
ky mustang
 
Posts: 123
Joined: Thu Apr 16, 2009 7:14 pm
Location: Benton, KY
Top

Re: My new engine

Postby WR169 » Tue May 19, 2009 8:04 am

Here is the first of many Pictures of your car. once you get to the site click the right arrow for more.

http://www.photoreflect.com/pr3/orderpa ... 402&po=402

We parked in the circle track. between turn 3-4. I saw your car lined up with the 1/4 mile cars. We are going down to try and get a Wally this Sunday are you coming out?

Hey are not the guy that was asking to borrow the flame retardent underwear were ya ;-)
Steve

6.7772 @ 101.51 1/8th 10.747 @ 122.24 1/4
User avatar
WR169
 
Posts: 3808
Joined: Wed Dec 06, 2006 10:24 pm
Location: Elizabethtown, KY
Top

Re: My new engine

Postby gearhead1011 » Tue May 19, 2009 9:23 am

WR169 wrote:Here is the first of many Pictures of your car. once you get to the site click the right arrow for more.

http://www.photoreflect.com/pr3/orderpa ... 402&po=402

We parked in the circle track. between turn 3-4. I saw your car lined up with the 1/4 mile cars. We are going down to try and get a Wally this Sunday are you coming out?

Hey are not the guy that was asking to borrow the flame retardent underwear were ya ;-)


I think you linked the wrong 1st pic there Steve. Try this one.
http://www.photoreflect.com/pr3/orderpa ... 0015&po=15
Chuck Woloch

Chuck's Automotive
Full line Computech dealer

Image
User avatar
gearhead1011
 
Posts: 2238
Joined: Wed Apr 19, 2006 5:11 pm
Location: Shepherdsville, KY
Top

Re: My new engine

Postby ky mustang » Tue May 19, 2009 9:50 am

Thanks for the link. I almost needed an underwear change , but not flame retardant =;

I will probably stay a little closer to home this weekend. I really like bg , but I work midnights and its tuff to get home and make it to work and feel like being there.
User avatar
ky mustang
 
Posts: 123
Joined: Thu Apr 16, 2009 7:14 pm
Location: Benton, KY
Top

Re: My new engine

Postby WR169 » Tue May 19, 2009 10:07 am

[/quote]

I think you linked the wrong 1st pic there Steve. Try this one.
http://www.photoreflect.com/pr3/orderpa ... 0015&po=15[/quote]

Mustangs :-you see so many they all look alike ;-)I hate it when I do that. #-oI hear ya on getting to work on time and wanting to work when you get there. We have about an hour and half drive and go forward in time. I thought that was funny when they announced the underwear. Driver in need \:D/\:D/\:D/\:D/
Steve

6.7772 @ 101.51 1/8th 10.747 @ 122.24 1/4
User avatar
WR169
 
Posts: 3808
Joined: Wed Dec 06, 2006 10:24 pm
Location: Elizabethtown, KY
Top

Re: My new engine

Postby gearhead1011 » Tue May 19, 2009 1:57 pm

ky mustang wrote:Thanks for the link. I almost needed an underwear change , but not flame retardant =;

You must not eat a lot of spicy foods then 8-[.

ky mustang wrote:will probably stay a little closer to home this weekend.

Would that be the track in Gleason?
Chuck Woloch

Chuck's Automotive
Full line Computech dealer

Image
User avatar
gearhead1011
 
Posts: 2238
Joined: Wed Apr 19, 2006 5:11 pm
Location: Shepherdsville, KY
Top

Re: My new engine

Postby ky mustang » Tue May 19, 2009 6:00 pm

I love spicey food =;. I may go to gleason saturday. I am gonna try to run with http://www.thedixiedoorslammers.com this year. Their first race is there in a couple of weeks. I got to get this thing lined out and will probably have to spray it a bit to run with them.

I 57 is having a quick 16 and a 5 K sp race saturday and sunday . They will let you enter both races and you do not have to run the s/p race until you are defeated or qk 16 is over. The qk 16 is ran bracket style. http://www.i57dragstrip.net/index_files/Page564.html.

I have got to decide by the weekend. Where are you guys going ?
User avatar
ky mustang
 
Posts: 123
Joined: Thu Apr 16, 2009 7:14 pm
Location: Benton, KY
Top

Re: My new engine

Postby WR169 » Tue May 19, 2009 8:28 pm

As it looks now, the Outlaw race saturday night at the Valley. Then Sunday Bowling Green for the Wally \:D/\:D/\:D/\:D/\:D/
Steve

6.7772 @ 101.51 1/8th 10.747 @ 122.24 1/4
User avatar
WR169
 
Posts: 3808
Joined: Wed Dec 06, 2006 10:24 pm
Location: Elizabethtown, KY
Top

Re: My new engine

Postby gearhead1011 » Tue May 19, 2009 11:28 pm

Greg wanted to bracket race this weekend so we'll be at the Valley too. Steve, Eddy won't be able to make it this weekend. Depending on the what order they run the classes Greg and I should be able to help each other but if not do you think you can help out again?

Randy we raced the Jr at I57 last year and at NTMP this year. We've been to Action Dragway in Terre Haute and our next Jr race is at Chandler next month. It's funny I've been to more different tracks with the Jr in the last year then I have been with my car in the last 20. That may change this year. I'm following the UMTR stick car series and our next race is at national trail. I'm not sure if I will make the 250 mile trip for that one. I will make most of those races that are within 130 miles of here. You can always bring that mustang to the Valley for the Outlaw race this Saturday.
Chuck Woloch

Chuck's Automotive
Full line Computech dealer

Image
User avatar
gearhead1011
 
Posts: 2238
Joined: Wed Apr 19, 2006 5:11 pm
Location: Shepherdsville, KY
Top

Next

Return to Show Off Your Stuff!

Who is online

Users browsing this forum: No registered users and 1 guest